復合纖維葉輪
Composite fiber impeller
擠壓鋁材葉輪
Extruded aluminum impeller
例：JZL/ZF4.5-1型號為4.5-1
The structure of the fan
葉輪組：№9.0以下葉輪為壓鑄鋁合金葉輪，№8.0、№9.0也可采用復合纖維材料葉片?！?.0以上葉 輪為組合輪轂、擠壓鋁型材葉片，№10.0~15.0葉片可采用復合纖維材料和碳纖。
主體風筒：由鋼板制成，采用模具翻邊，有法蘭圈加強。材料為普通鋼板熱浸鋅或不銹鋼。
支撐架：將風機專用電機支撐于風筒中，使風筒與葉輪間隙均勻。
接線盒：材質為高強度尼龍或鑄鐵。
出線方式：在風筒上安裝接線盒或電機帶接線盒。
結構類型：管道型（或按用戶尺寸加工）。
電機：電機為制冷風機專用防潮耐低溫三相異步電動機，鑄鐵殼，防護等級IP55，電壓可 220V～660V，頻率50Hz或者60Hz，電壓頻率還可以根據客戶要求制定。
防護網：風機出口加護防護網，表面熱浸鋅或清洗。
Impeller assembly: Impellers below №9.0 are made of die-cast aluminum alloy, while №8.0 and 9.0 blades are made of composite fiber. Impellers above №9.0 are combined wheel hubs with extruded aluminum profile blades, while №10.0-15.0 blades are made of composite fiber.
Main air duct: Made of steel plate, flanged by die and reinforced by flange ring. Common steel plate or stainless steel, hot-dip galvanizing.
Support frame: Support the fan motor in the air duct to make the clearance between the air duct and the impeller uniform.
Junction box: Made of high strength nylon or cast iron.
Wiring method: Install junction box or motor junction box on the air duct.
Structure type: Pipeline (Or machine according to the size required by the user).
Motor: Moisture-proof and low-temperature resistant three-phase asynchronous motor for cooling fans, cast iron shell, IP55. 220V-660V/50Hz or 60Hz, customizable based on customer demands.
Protective net: Provided at the fan outlet, surface subject to hot-dip galvanizing or cleaning.
規格：本系列為普通低壓軸流通風機，依葉輪直徑的大小分為5.6、6.3、7.1、8.0、9.0、10、12、12.5、13、14、15、 16、18、20、22、24機號。
傳動形式：電動機直接與葉輪聯結。
Specifications: this series of circulation fan axis for the common low, according to the size of the impeller diameter 5.6, 6.3, 7.1, 8.0, 9.0, 10, 12, 12.5, 13, 14, 15, 16, 18, 20, 22, 24immediately.
Transmission form: the motor is connected directly with the impeller.
（101325Pa 20℃ 50%，防潮電機C）
（101325Pa 20℃ 50%, moisture-proof motor C ）
YT型式安裝電機
9.0號壓鑄鋁或10~15號復合纖維葉輪外形圖
YT-mounted motor
Outline drawing of №9.0 die-cast aluminum impeller or №10-145
composite fiber impeller
YCL型式安裝電機
16.0~24.0號擠壓鋁葉輪外型圖
YCL-mounted motor
Outline drawing of №16.0-24.0 extruded
| 機號?Size | ΦA | ΦB | ΦC | ≤L | ≤L1 | n-Φd |
|---|---|---|---|---|---|---|
| 9.0 | 904 | 970 | 1012 | 380 | 520 | 8-Φ16 |
| 10.0 | 1004 | 1070 | 1112 | 350 | 520 | 8-Φ16 |
| 11.2 | 1124 | 1190 | 1232 | 350 | 520 | 10-Φ16 |
| 12.0 | 1210 | 1260 | 1310 | 350 | 580 | 10-Φ16 |
| 12.5 | 1260 | 1310 | 1360 | 350 | 710 | 10-Φ16 |
| 13.0 | 1310 | 1360 | 1410 | 350 | 710 | 10-Φ16 |
| 14.0 | 1410 | 1470 | 1520 | 350 | 710 | 10-Φ16 |
| 15.0 | 1510 | 1575 | 1630 | 350 | 710 | 10-Φ16 |
| 16.0 | 1610 | 1680 | 1730 | 300 | 760 | 12-Φ16 |
| 18.0 | 1810 | 1880 | 1930 | 300 | 760 | 12-Φ16 |
| 20.0 | 2015 | 2080 | 2140 | 350 | 900 | 18-Φ16 |
| 22.0 | 2220 | 2290 | 2350 | 350 | 900 | 20-Φ16 |
| 24.0 | 2420 | 2490 | 2550 | 450 | 1150 | 20-Φ16 |
( 由于版本不同，實際定供尺寸以確認圖為準 )
